Polymer Cement

A Polymer Cement floor is typically laid to address crumbling, pitted or otherwise stressed concrete flooring.  It is a functional floor on its own or can provide an excellent underlay for another layer of flooring.  It is stronger than standard concrete with a “walk-on” cure in 48 hours and a full cure in 28 days.

Polymer Cement can be mixed with a number of cement colours. It is suitable for use under equipment, for example, in a vehicle workshop or manufacturing facility.

As with all floors, proper preparation is required to prevent premature failure of the floor. That can mean surface grinding, concrete reduction or scabbling. We take care of all the preparation steps. Every floor that we lay conforms to the Bethell Standard. It means you get the exact thickness you were quoted, the exact slip resistance you need and a floor made from only the highest quality products we have identified in over 50 years of operation.

Your account representative will be able to specify the best choice of flooring for your particular application.

Polyester Floors have these specifications:
Recommended for these applications
All Commercial and Industrial Applications as an underlay. See account representative for use as a top layer
Hardening Time / Potential downtime
1 hour after application
Slip Resistance
Slip Resistance is not added to this product
Typical Floor Thickness
Polymer Cement floors are typically 3mm to 6mm thick and the solution is self-smoothing (often referred to as self-levelling).
Can it be repaired?
Yes, individual sections can be removed and replaced without requiring the whole floor to come up
Available fillers
Quartz sand, Marble, Bauxite, Aluminium Oxide, Silica Flour, Coloured Sand,Decorative additives such as coloured glass, luminescent plastic and more.
Available Colours
Water Absorption
Less than 3% of material after 28-day cure
Gives off VOC’s?
5 Year Warranty